Used Machine Tools and Equipment from

SPECIFICATIONS
CAPACITY
Swing over bed		16 in.
Swing over cross slide std. Slide		8 5/8”
~ Short slide		10 5/8”
Swing in gap		23 ½”
Length of gap, from spindle nose		12 ¼”
Center distance (actual turning length)		40”
Maximum length between centers		42”
HEADSTOCK AND BED:
Spindle Speeds		#14
Spindle Speeds – low range		22-1000 rpm
High range		45-2000 rpm
Spindle Nose CAMLOCK D-1		6”
Spindle Hole		2”
Spindle Center (Morse)		#4
Bed, width x depth		13 ½ x 16”
THREADS AND FEEDS:
Thread Range		1-80 threads per in.
~ Diametral pitch		2-72 mm
Metric pitch		0.5-4.0 mm
Module pitch		0.25-20 mm
Feed range: carriage		.002-.242 in. per rev.
Cross slide		.001-.121 in. per rev.
Leadscrew (Acme), dia.		1-9/16-4 “ t.p.i.
CARRIAGE AND COMPOUND:
Cross slide travel		12”
Top slide travel		5 ½”
Tool shank size (round toolpost)		6/8 x 1 3/8”
TAILSTOCK:
Spindle diameter		2 ¾”
Spindle travel		7”
Size of center, Morse		5
Tailstock set-over (either side)		½”
DRIVE MOTOR:
Motor – (standard)		7 ½ Hp
~ (oversize)		10 Hp