Specifications:     V-Ram   Angular positioning for mill-drill-bor & tap   Cross travel-square way, turcite 16" hardened/ground   Table-Working surface 10"x50"   Longitudinal Travel 35"   Vertical Knee Travel, box way 15.3" hardened/ground   Spindle Taper R-8   Spindle Collet Capacity:   Split Collet 3/4"   Solid Collet 1-1/8"   Automatic Power Down feed to Spindle   Motor Drive 3 Hp   Forward &Reverse Spindle Control   Back Gears   Variable Spindle Speeds (inf) 60-4500 rpm   One Shot Lubrication System USER FRIENDLY CONVERSATION CONTROL SPECIFICATIONS   ~Closed Loop Position Control ~CNC, DXF & G codes ~2-Axis [X-Y Plane] ~3-Axis [X-Y-Z Planes] ~Fully Prompt Menu System ~Canned Cycles included: Auto geo.calc Reverse step Reverse path Change steps Peck drilling Bolt hole circ. & box drill cycles Blend Edit steps, Prog. events Pocket milling Repeat Circle milling Facing Pocket circles Mirror image Engrave Teach Custom pocket Tool library (99 tools) Feed override Cutter path compensation Immediate part view graphics Math/Trig calc. Explode Part rotate Part skew Spiral & Island milling Axis jog mode Chamfer   ~ English/Metric ~ Absolute/Incremental ~ 3-1/2" Floppy Disk Port ~ RS-232 Port ~ Changeable Display Res. .0001-.001 ~ Pentium mag. flash memory ~ 30 meg. programmable memory