| |
Cylindrical Grinding Machines - C1020PC2 Cylindrical Grinder |
A fine example of American Craftsmanship, our C1020PC2 Cylindrical Grinders are built 100% in the U.S.A. and designed to provide an uncomplicated grinding system at an economical price. Both models feature annealed cast-iron construction throughout the entire machine, including the base, wheelhead, saddle and table. This quality construction provides the Scepter with a lifetime of stability and accuracy. The special saddle infeed construction and table features a pre-loaded anti-friction way system, for extreme accuracy of movement of multi-diameter parts at a very economical price. |
| |
Quality Construction |
K.O. LEE grinders are built from high quality castings. Each machine is designed, manufactured and assembled at the same location. A thorough inspection is performed by a Quality Assurance team, during and after machine build. In-house run-offs and
quality inspections by the customer are welcomed. Please contact K.O. LEE Company for more information. |
| |
C1020PC2 Cylindrical Grinder |
 |
The C1020PC2 features TRAVERSE, STEP, SHOULDER and PLUNGE grinding cycles, in addition to full in-cycle WHEEL DRESSING with fully automatic wheel dress compensation. |
Optional internal grinding applications include straight I.D. and shoulder and step cycles. Radius grinding / dressing requires the use of the CNC control. |
The two axis NUM AXIUM POWER PC based control uses Microsoft Windows operating system, programs, generated on the control and can either be stored on hard drive or on the customer's network drives. |
|
Scepter CNC Cylindrical Grinder
|
|
| |
Push-Button Cylindrical Grinding Made Simple |
Featuring a user-friendly control that requires a minimum of operator training before operation. The Leematic control features menu-prompting to "walk" you through the program parameters. Model uses servo drives for accurate, closed-loop positioning of both axes. |
| |
Customized to Your Application |
The multifunctional grinders are capable of both O.D. and optional I.D. grinding. Plunge, traverse, shoulder, taper and radius grinding applications, or combinations of cycles are available (some cycles require optional software or use of the CNC model). Cycles for dressing and wheel form generation are also available. Workpieces can be held by chucking or between centers, which makes the machine ideal for tool room or production environments. Multi-diameter grinding capabilities reduce the need for multiple set-ups and improves overall productivity. Automatic infeed allows presetting for rapid approach, feedrates, change points and final sparkout. These features result in improved speed, accuracy and efficiency of the grinding process. |
| |
C1020PC2 Standard Equipment and Features |
 |
5-HP Wheelhead Motor |
|
14" x 1 1/2" x 5" (350 x 38 x 127 mm) grinding wheel with wheel collet and balancing weights |
|
50-gallon paper roll filter coolant system |
|
Live and dead center headstock with 1/3-HP variable speed motor and 5MT / 3MT center adapter |
|
Low lube automatic shut-off |
|
Light fixture |
|
Individual dwell control at each end of table reversal |
|
Adjustable spring loaded tailstock with 3MT center |
|
Precision ballscrews on both axis |
|
Hand pulse generator |
|
| |
Additional Options |
| |
|
Internal grinding attachment |
|
Renishaw probe for shoulder location |
|
In-process diameter gauging |
|
Electronic gap eliminator |
|
5C collet assembly with handwheel and draw tube |
|
Table mounted wheel dresser |
|
6" Adjust-Tru 6 jaw chuck assembly |
|
8 1/4" Adjust-Tru 6 jaw chuck assembly |
|
Follow rests with two support points, either solid-stop or spring-loaded, range is 1/4" to 5" |
|
5C air collet closure |
|
16" wheel balancing kit |
|
Circular Magnetic chuck |
|
SBS wheel balancing system |
|
| |
Warranty |
Warranty for manual surface grinders is for a period of two years after shipment against defect in material workmanship. |
| |
